As an essential business, AR is continuing to operate and provide our customers with the service and support they need during this time. We take the health and safety of our employees very seriously and have additional measures in place to maintain a safe working environment.

RF Amplifiers (Solid State) - Linear, broadband and VSWR tolerant

RF Amplifiers:

All The Power You Need…With Legendary Performance & Reliability

Find it Fast

“A” Series: Up to 400 MHz / 25 to 50,000 watts CW depending upon frequency range “W” Series: Up to 1,000 MHz / 1 to 10,000 watts CW

Our “A” and “W” Series amplifiers have the power to deliver all the field strength you need. With unsurpassed mismatch capabilities and excellent flatness, they provide all the power promised over the entire operating band.

We subject our amplifiers to the harshest conditions just to make sure they give you reliable service and performance over the long haul. We test them under various output VSWR loads to stress them to the limit. The only problem we ran into was that there were no available loads to handle the enormous power up to 80,000 watts that our amplifiers deliver. Whereas this would stop most manufacturers, it presented another challenge to our talented designers, and we designed our own. All our RF solid-state amplifiers have modulation capability that will faithfully reproduce AM, FM or Pulse Modulation appearing on the input signal for use in the most demanding EMC applications.

These technologically advanced amplifiers perform beyond the norm, beyond expectations, and way beyond the abilities of other test amplifiers.

These self-contained, broadband, completely solid-state amplifiers are designed for applications requiring the ultimate in output power over a wide instantaneous bandwidth with high gain. Extensive control and status reporting capabilities are available both locally and remotely. Most models feature air-cooled designs while some higher power units feature liquid cooled designs. The touch-screen panels are intuitive, convenient, and easy to use.

High Power RF Amplifiers

model description
1200A225 1200 Watt CW, 10 kHz - 225 MHz
2500A225B 2500 Watt CW, 10 kHz - 225 MHz
5000A225A 5000 Watt CW, 10 kHz - 225 MHz
10000A225A-A 10000 Watt CW, 10 kHz - 225 MHz, Air Cooled
12500A225A-L 12500 Watt CW, 10 kHz - 225 MHz, Liquid Cooled
16000A225A-A 16000 Watt CW, 10 kHz - 225 MHz, Air Cooled
20000A225A-L 20000 Watt CW, 10 kHz - 225 MHz, Liquid Cooled
1000A400 1000 Watts CW, 10 kHz - 400 MHz
1000W1000G 1000 Watt CW, 80 - 1000 MHz
1500W1000A 1500 Watt CW, 80 - 1000 MHz
2000W1000D 2000 Watt CW, 80 - 1000 MHz
3000W1000B 3000 Watt CW, 80 - 1000 MHz
4000W1000B 4000 Watt CW, 80 - 1000 MHz
6000W1000 6000 Watt CW, 80 - 1000 MHz
10000W1000A 10000 Watt CW, 80 - 1000 MHz

Mid Power RF Amplifiers

model description
350AH1A 350 Watt CW, 10 Hz - 1 MHz (w/ DCP, IEEE-488, RS-232, USB and Ethernet interfaces )
800A3B 800 Watt CW, 10 kHz - 3 MHz
150A100D 150 Watt CW, 10 kHz - 100 MHz
125A250 125 Watt CW, 10 kHz - 250 MHz
500A250D 500 Watt CW, 10 kHz - 250 MHz
175A400 175 Watt CW, 10 kHz - 400 MHz
250A400 250 Watt CW, 10 kHz - 400 MHz
350A400 350 Watt CW, 10 kHz - 400 MHz
600A400 600 Watt CW, 10 kHz - 400 MHz
250U1000 250 Watt CW, 100 kHz - 1000 MHz
500U1000 500 Watt CW, 100 kHz – 1000 MHz
150W1000B 150 Watt CW, 80 - 1000 MHz
250W1000C 250 Watt CW, 80 - 1000 MHz
500W1000C 500 Watt CW, 80 - 1000 MHz
750W1000B 750 Watt CW, 80 - 1000 MHz

Low Power RF Amplifiers

model description
100A400AM20 100 Watt CW, 4 kHz - 400 MHz - For BCI testing
25A250B 25 Watt CW, 10 kHz - 250 MHz
50A250 50 Watt CW, 10 kHz - 250 MHz
100A400A 100 Watt CW, 10 kHz - 400 MHz
1U1000 1 Watt CW, 10 kHz - 1000 MHz (no remote interface)
2.5U1000 2.5 Watt CW, 10 kHz - 1000 MHz (no remote interface)
5U1000 5 Watt CW, 10 kHz - 1000 MHz (no remote interface)
10U1000 10 Watt CW, 10 kHz - 1000 MHz
25U1000 25 Watt CW, 10 kHz - 1000 MHz
50U1000 50 Watt CW, 10 kHz - 1000 MHz
100U1000 100 Watt CW, 100 kHz - 1000 MHz
50W1000D 50 Watt CW, 50-1000 MHz