RF Amplifiers:

All The Power You Need…With Legendary Performance & Reliability

Our “A” and “W” Series amplifiers have the power to deliver all the field strength you need. With unsurpassed mismatch capabilities and excellent flatness, they provide all the power promised over the entire operating band.

We subject our amplifiers to the harshest conditions just to make sure they give you reliable service and performance over the long haul. We test them under various output VSWR loads to stress them to the limit. The only problem we ran into was that there were no available loads to handle the enormous power up to 80,000 W that our amplifiers deliver. Whereas this would stop most manufacturers, it presented another challenge to our talented designers, and we designed our own. All our RF solid-state amplifiers have modulation capability that will faithfully reproduce AM, FM or Pulse Modulation appearing on the input signal for use in the most demanding EMC applications.

These technologically advanced amplifiers perform beyond the norm, beyond expectations, and way beyond the abilities of other test amplifiers.

These self-contained, broadband, completely solid-state amplifiers are designed for applications requiring the ultimate in output power over a wide instantaneous bandwidth with high gain. Extensive control and status reporting capabilities are available both locally and remotely. Most models feature air-cooled designs while some higher power units feature liquid cooled designs. The touch-screen panels are intuitive, convenient, and easy to use.

model

description

2500 W CW, 10 kHz – 225 MHz
12500 W CW, 10 kHz – 225 MHz, Liquid Cooled
1000 W CW, 10 kHz – 400 MHz

Mid Power RF Amplifiers

model

description

800 W CW, 10 kHz – 3 MHz
125 W CW, 10 kHz – 250 MHz
175 W CW, 10 kHz – 400 MHz
250 W CW, 10 kHz – 400 MHz
350 W CW, 10 kHz – 400 MHz
600 W CW, 10 kHz – 400 MHz

Low Power RF Amplifiers

model

description

100 W CW, 4 kHz – 400 MHz – For BCI testing
25 W CW, 10 kHz – 250 MHz
1 W CW, 10 kHz – 1000 MHz (no remote interface)
2.5 W CW, 10 kHz – 1000 MHz (no remote interface)
5 W CW, 10 kHz – 1000 MHz (no remote interface)
10 W CW, 10 kHz – 1000 MHz
25 W CW, 10 kHz – 1000 MHz
50 W CW, 10 kHz – 1000 MHz
100 W CW, 100 kHz – 1000 MHz
1 W CW, 10 kHz – 1000 MHz (no remote interface)
50 W CW, 10 kHz – 250 MHz