AM7000 (Discontinued)

The Model AM Series consists of antenna mounting adaptors that will allow polarization change during horizontal and vertical testing without removing the antenna from its tripod. The AM Series mounting adaptors are available for the earlier version antenna models listed below. All tools necessary for installation are included with each mounting adaptor. The export classification… Continue reading AM7000 (Discontinued)

ATC25M1G (Discontinued)

The Model ATC25M1G Cavitenna™ was developed specifically for use in a shielded room of the type commonly used for RF susceptibility testing. The Cavitenna is a small, broadband radiator designed to couple energy into the shielded room as though it were a resonant cavity. Because a shielded room is a space bounded by electrically conducting… Continue reading ATC25M1G (Discontinued)

ATP10K100M

AR RF/Microwave Instrumentation’s Model ATP10K100M is a broadband, high power RF Field Generator. The unit is capable of generating intense fields in a large volume over a wide frequency range. The ATP10K100M is a balanced parallel conductor transmission line that is 2.4 meters long and 1.0 meters wide. It has been designed to match the… Continue reading ATP10K100M

ATE10K100M

The ATE10K100M is a broadband E-field generator of unique design, which offers operation to 100 MHz, good spatial field uniformity, and high field intensities. This generator is compact and easily supported and positioned using a tripod. It uses high-power low-inductance internal load resistors to terminate the RF drive power and a low-loss broadband impedance transformer… Continue reading ATE10K100M

ATE10K30MA

Model ATE10K30MA is a high-power electric field generator designed to generate intense E fields over a frequency range of 10 kHz to 30 MHz. It is recommended for use in susceptibility testing. The ATE10K30MA is small enough to be handled easily in shielded rooms while being compatible with the high RF output powers available from… Continue reading ATE10K30MA

ATE10K25M-1

The Model ATE10K25M-1 is a broadband, high-power E-Field Generator. It uses low inductance internal load resistors to terminate the RF power and incorporates a broadband transformer to increase the output voltage. The transformer output is unbalanced so that the bottom flange may be unbolted from its wheeled cart and grounded, enabling use above a ground… Continue reading ATE10K25M-1

ATH26G40A

The Model ATH26G40A is a wide band, high gain, high power microwave horn antenna. With a minimum gain of 18.5dB over isotropic, the Model ATH26G40A supplies the high-intensity fields necessary for RFI/EMI field testing within and beyond the confines of a shielded room. The Model ATH26G40A is extremely compact and lightweight for ready mobility, yet… Continue reading ATH26G40A

ATH26G40A-1

The Model ATH26G40A-1 is a wide band, low gain, wide beamwidth, high power microwave horn antenna. With a minimum gain of 9dB over isotropic, the Model ATH26G40A-1 supplies the high-intensity fields necessary for RFI/EMI field testing within and beyond the confines of a shielded room. The Model ATH26G40A-1 is extremely compact and lightweight for ready… Continue reading ATH26G40A-1

ATH18G40

The Model ATH18G40 is a wide band, high gain, high power microwave horn antenna. With a minimum gain of 15.2dB over isotropic, the Model ATH18G40 supplies the high-intensity fields necessary for RFI/EMI field testing within and beyond the confines of a shielded room. The Model ATH18G40 is extremely compact and lightweight for ready mobility, yet… Continue reading ATH18G40

ATH18G27A-1

The Model ATH18G27A-1 is a wide band, low gain, wide beamwidth, high power microwave horn antenna. With a minimum gain of 8.7dB over isotropic, the Model ATH18G27A-1 supplies the high-intensity fields necessary for RFI/EMI field testing within and beyond the confines of a shielded room. The Model ATH18G27A-1 is extremely compact and lightweight for ready… Continue reading ATH18G27A-1